Description
Two-component thixotropic polyester suitable for repairs on reinforced plastics (yachts, tanks, sprayers, molds), laminating and sealing works.
Features
High quality thixotropic polyester resin
Ideal for repairs on reinforced plastics
Easy application
Excellent heat resistance
Higher adhesive bond line thickness
High strength
Low Shrinkage
Effective insulation
Chemical resistance
Application
Ideal for stuccoing surfaces of plaster, concrete, masonry, wood, gypsum board and cement board.
Instructions for use
After the thorough cleaning of the surface from dust, loose parts, rust, oils, etc., with a whirlpool, sandpaper or sandpaper, it is plastered with polyester putty (if and where needed). Apply the product directly to the surface. Once the mixture is well absorbed, the fiberglass is spread on it and immediately after that a second layer of the same mixture is applied. The laying is done with a brush or roller and with enough pressure on the tool, so that the mixture and fiberglass become one body, without intermediate bubbles. The above work is repeated, until the required thickness is reached from the construction or repair. Can be colored, if desired.
Tips:
The substrate must be stable and free of dust, grease, loose particles etc.
Stored in in temperature between +5°C and +35°C
Protect from direct sun exposure and frost
Clean your tools immediately after use with ASETON, after first removing most of the material from them.