Free shipping for orders over 69.00€ & up to 3kg
Epoxy Finishing Filler Grey 750gr

Free shipping for orders over 69.00€ & up to 3kg
A strong two-component epoxy filler ideal for epoxy resins. Provides a smooth surface and waterproofing as it is pore-free. Suitable for use on GRP, steel, wood, and aluminum. When applied over epoxy resins, the appropriate primer must be used beforehand.
A strong two-component finishing filler with epoxy resins. Very fine and non-shrinking. Provides a very smooth surface. Apply only in thin layers (maximum 1 mm). Before use, mix each component separately, then mix thoroughly together until the color is uniform. Do not use below 60°F/12°C. Best sanding properties are achieved between 24 and 48 hours.
Fiberglass – Steel – Wood – Aluminium: fine epoxy finishing filler for use with Epifanes Epoxy Filler 1500 in two-component paint systems above and, if needed, below the waterline. If overcoated above the waterline with a one-component finish, first apply a coat of Epifanes Polyurethane Yacht Coating or Polyurethane Primer.
SPECIFICATIONS
Pot life after mixing: 15-40 minutes depending on temperature and filler volume
Mixing ratio: By volume: 100 : 50
By weight: 100 : 50
Sanding: After 24 hours at 65°F/18°C
Color: Grey