Description
Sizes and mounting:
Installation (Hole) diameter and Outside diameter: 52 mm - 2 1/16 Inch and 59 mm - 2 1/3 Inch
Installation depth: 50 mm
Locking height with Spinlock nut: 0.5 mm - 20 mm
Locking height with bracket: 2 mm - 15 mm (Optional)
Flushmount: Optional kit A2C59510864
Functionality:
Coolant temperature upper scale range: +50°C to +150°C
Coolant temperature under scale range: +120°F to +300°F
Sensor signal input coolant temperature gauge: Veratron NTC Thermistor 322.8-18.6 Ohm
Accuracy: < 3.6 angular degrees
Connection: Hirschmann 8 pins MQS connector
Power supply:
Operating voltage: 10 to 32 Volt DC
Current consumption: < 140 mA including warning LED
Reverse polarity protection: Yes - 5 Minutes
Short circuit protection: Yes - 1 Minute
Dial & Pointer:
Deflection angle: 90°
Dial colour: Black
Dial Illumination: Amber LED backlight 605nm
Pointer: White LED backlight
Warning LED: Red (632nm)
Programming: Veratron USB software kit
Design:
Model: Veratron ViewLine Marine
Lens: Dual - Anti-glare - Anti-Fog
Standard bezel: Round black (Interchangeable)
Protection and standards:
Front protection class: IP67 (IEC 60529)
Rear protection class: IP52
Relative humidity: Maximum 95%
Operating temperature: -30°C to +80°C (Plastic bezel)
CE standard: Yes
DNV GL Certification: Yes
Mechanical shock continuous: 25G - 6ms - 1Hz
Mechanical single shock 100G - 11ms
Free fall test: 1 Meter - 3x
Housing flame retarding: UL94-VD
