Description
This 2-part epoxy resin set consists of the 105 Epoxy Resin and 206 Slow Hardener. The professional epoxy system was developed specifically for the boating sector. It has high strength and outstanding versatility, making it suitable for a wide range of work and repairs on your boat. The system is also highly suitable for domestic use and other DIY projects. It can be used on a variety of surfaces such as wood, GRP or metals.
206 Slow hardener is an epoxy hardener, which consists of a low viscosity mixture of polyamines. It can be mixed with the 105 Epoxy resin in the ratio of 5 parts resin to 1 part hardener, the cured mixture yields a rigid, high-strength, moisture-resistant solid body with excellent bonding and barrier coating properties, perfectly suited as a coating or adhesive and for wetting out fiberglass. For an optimal mixing ratio, it is recommended to use the West System 300 Mini pumps. One whole pump of the resin and hardener yields the correct mixing ratio.
The hardener is typically used for larger areas and bondings that take a longer time. Pot life at 22°C: 25 - 30 minutes. Hardens to a solid mass in about 10 hours at 22°C and reaches full hardening after about nine days.
Possible applications:
Bonding
Filleting
Affixing hardware and flowing out to create a base for hardware
Fastener bonding
Laminating
Filling
Laminating with fiberglass
Barrier layering
Substrates:
Wood
Fiberglass
Composites
Various metals
Adding fillers
WEST SYSTEM offers a range of fillers that are used to thicken the base mix of resin and hardener for specific applications. By adding filler, a "thicker" consistency can be achieved (suitable for filling cavities, fillets, making large, uneven bondings and for use as a filler).
