Description
TECHNICAL SPECIFICATIONS
Nominal battery voltage 12 VDC
Continuous power @ 25°C 2500 VA
Power 30 min. @ 25°C 3000 VA
Power 5 sec. @ 25°C 7500 VA
Maximum load Up to short-circuit (fully protected)
Maximum a-symmetric load Up to continuous power
Load detection (stand-by) 2 to 25 W (AES) Automatic Enable System
Power factor 0.1 - 1
Efficiency (@ full load) 93 %
Consumption OFF / Stand-by / ON 1.8 W / 2.1 W / 14 W
Output voltage Pure sine wave 230 VAC (+/- 2%)
Output frequency 50 Hz / 60 Hz (1) +/- 0.05% (crystal controlled)
Harmonic distortion (voltage) <2% THD
Overload and short-circuit protection Automatic disconnection with 3 time restart attempt
Overheat protection Warning before shut-off with automatic restart
BATTERY CHARGER SPECIFICATIONS
Charge Characteristic 6-step Bulk - Absorption - Floating - Equalization - reduced floating - periodic absorption. Number of steps, thresholds and return amps are completely adjustable.
Maximum charging current 160 A
Temperature compensation With Whisper temperature sensor WPC-BTS
Power Factor Correction (PFC) EN 61000-3-2
Input voltage range 150 to 250 VAC
Input frequency range 45 to 65 Hz
Input current max. (transfer relay) / Output current max. 50 A / 56 A
Transfer time <15 ms
MAIN SPECIFICATIONS
Weight 34 kg
Dimension H x W x D [mm] 500 x 300 x 230 mm
Protection degree IP21
Color RAL 9003
Conformity Directive EMC 2004/108/EC : EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2, 62040-2. Low voltage directive 2006/95/EC : EN 62040-1-1, EN 50091-2, EN 60950-1
Operating temperature range -20..+40°C, derating to 55°C
Relative humidity (operational) 95% without condensation
Ventilation Forced from 45°C
Warranty 2 years
Acoustic level <40 dB / <45 dB (without / with ventilation)
ACCESSORIES
60201032 WPC-BUS cable 15 meter
60201030 WPC auto start cable 15 meter
60201021 WPC 24 VDC - 5 A slave charger (optional second slave charger to be 'build in' WPC)
40280101 Touchpanel screen full color 7”
