Description
Acrylic water-based wood stain, suitable for repairing defective spots on wooden surfaces. Its composition ensures excellent adhesion, easy spreading and filling without shrinkage and cracking. It dries quickly and gives a smooth and hard surface with an excellent finish. It can be painted, once completely dry, with water-based or solvent-based paints.
Features
Repairs minor irregularities and defects in the wooden surface
Helps to repel moisture
Prevents the wood from drying out
Enhances the natural texture
Gives excellent adhesion
Helps to improve the structure of the wood
Easily applied with a spatula, without dilution, and can be sanded after about 3 hours
Specific gravity: 1,8 gr/ml
Drying time: 4-5 h (20°C)
Recoating: 3 h
Application: Spatula
Yield: 2-3m²/kgr
Storage. Do not apply at temperatures below 10°C and above 35°C
Application
Ideal for repairing defects and dents in any wooden surface.
Instructions for use
Clean the surface by removing dirt, dust, oil and loose debris
Apply the wood stain using a spatula
Wait about 3 hours for it to dry completely
Use a fine sandpaper P180-220 and gently sand the areas of the surface where you wish to remove the extra putty, revealing the bare wood (can be sanded after about 3 hours)
Do not apply at temperatures below 10°C and above 35°C
Tip
It is necessary to clean the tools/spatula immediately after use with plenty of water and detergent.
Equipment / Tools Needed
Putty knife / Spatula
Rags
Sandpaper (variety of grits, from medium to very fine)